The Huawei S5735‑L48T4XE‑A‑V2 is a high‑performance enterprise switch from Huawei’s CloudEngine S5700‑L series. Ideal for campus and branch network deployments, it offers scalable stacking, advanced PoE+, and comprehensive Layer 3 capabilities.
▪ Ports: 48 x 10/100/1000BASE‑T ports, 4 x 10GE SFP+ ports, 2 stack ports, 1 console port, 1 USB port
▪ Switching capacity: 336 Gbps
▪ Packet forwarding rate: Approx. 250 Mpps
▪ Mac address table: 32K entries
▪ VLAN: Supports up to 4K VLANs
▪ Memory: 2 GB DRAM, 1 GB flash
▪ Dimensions (W × D × H): 442 × 220 × 43.6 mm (17.4 × 8.66 × 1.72 in)
▪ Power: AC input, 100–240 V, 50/60 Hz; max power consumption ~65 W (non‑PoE)
▪ Heat dissipation: ~224 BTU/hr
▪ Operating temperature: 0 °C to 45 °C; storage –40 °C to 70 °C
Huawei’s design ensures a compact 1U form factor suited for rack mounting. The front panel offers easy access to all Ethernet, SFP+, stack, console, and USB ports. Dual stack ports located on the rear enable stacking up to 9 units at backplane speeds. Equipped with efficient fans and a nearly full‑range AC power module internally, the switch balances reliability with a low noise profile. The dimensions of 442 × 220 × 43.6 mm conform to 19‑inch rack standards.
With support for PoE+, this model is perfect for powering devices like IP phones, 802.11ac access points, or surveillance cameras. The switch can deliver up to 30 W per port under 802.3at, supporting a total PoE budget in line with enterprise setup needs.
The S5735‑L48T4XE‑A‑V2 supports stacking via two dedicated 12GE ports. Up to 9 switches can form a single logical device, simplifying management and offering high backplane bandwidth. This scalability allows network admins to grow capacity without adding complexity.
Huawei equips this switch with robust L3 features including static route, RIP, OSPF, BGP, and multicast protocols like PIM‑SM. It efficiently handles inter‑VLAN routing, routing table, and ARP table with enterprise‑grade performance. Additionally, features such as VRRP, ACLs, DHCP snooping, and advanced security policies ensure operational integrity and secure deployment.
Advanced QoS capabilities include:
Supports DSCP and TC remarking, classification based on ACLs and protocols.
High‑priority traffic can be prioritized, with hardware queues applied.
Both ingress and egress rate limiting across ports or flows, ensuring bandwidth control.
Supports WRED and tail‑drop mechanisms.These QoS functions help maintain consistent application performance across converged networks.
Huawei designed multiple mechanisms to ensure uptime:
Redundancy in stacking allows automatic failover from malfunctioning units.
Internal AC power module ensures backup from internal power switchover.
Fans and thermal controls adjust speeds to maintain optimal operation.
Huawei integrates multiple security functions to protect network integrity:
Supports port‑based, VLAN‑based, and protocol ACLs for traffic control.
Prevents MAC spoofing attacks by locking IP‑MAC combinations.
Blocks rogue DHCP servers and ARP spoofing.
Port‑based authentication via RADIUS helps restrict access.
The switch supports a wide array of management channels:
Fully featured CLI compatible with Huawei IOS‑like syntax.
Intuitive web management supported via Ethernet.
Allows SNMPv2/v3 and RMON for monitoring.
NETCONF and Telnet/SSH offered for remote configuration.
USB port lets users import/export configs or firmware.
Operating between 0 °C and 45 °C, and storing between –40 °C to 70 °C, this switch is suitable for typical data center or campus environments. Its heat dissipation of ~224 BTU/hr keeps rack temperatures stable, and the low‑noise internal fan enhances usability.
▪ Edge access in campus networks supporting high‑density user or IoT device connections.
▪ Powering and connecting PoE devices such as wireless access points or surveillance systems.
▪ Building a scalable, stackable distribution layer with robust L3 and QoS features.
▪ Branch office core switch with strong security tools and management capabilities.
Compared to non‑stackable variants like S5735‑L48T4S‑A‑V2, this model adds stack ports and 10GE uplink capabilities. It provides denser connectivity and scalability than smaller models like S5735‑L8T4S‑A‑V2. In contrast to PoE versions (e.g., L48P4XE), this unit focuses on higher uplink speed rather than PoE budget.
Huawei supports this switch with regular firmware releases, offering bug fixes and feature enhancements. The USB port, web GUI, and CLI tools provide multiple options for firmware upgrades.
The switch offers strong performance per watt, consumes ~65 W without PoE, and heat is controlled effectively. Huawei’s global support and service agreements ensure long‑term operational reliability.
The Huawei S5735‑L48T4XE‑A‑V2 is a highly capable enterprise switch offering extensive connectivity, stacking, PoE+, robust L3/QoS, and security features. Its design balances performance, reliability, and scalability, making it ideal for modern campus, branch, and tower networks requiring future‑ready access infrastructure.
Huawei CloudEngine S5735 Series Switches
Huawei All Series Switches New and Used
For Huawei product list and quote, please visit: https://www.hi-network.com/categories/huawei or contact us at www.hi-network.com (Email: [email protected])